Hello all. I have a FSG447GHS0 that doesn't dry clothes. Upon starting, the gas flows, the igniter glows, and I get a blue flame but it stays lit for only 6-7 min, and then switches off and will not light up again. I have tested the following parts using a digital multimeter:
Thermostat - This has 4 prongs. Two are close to each other and are arranged vertically. The resistance across them is 2.96 @ 20k. The other two are probably 3-4 times farther apart than the first two and are arranged horizontally. The resistance across them is 0.100 @ 2k.
Igniter - 0.056 @ 2k.
Flame sensor - I can't get a constant reading. The values range from 0.002 to 0.210 @ 2k.
Solenoids -
2-pronged one: 1.347 @ 2k.
3-pronged one: Reading across prong #1 and #2 is 1.450 @ 2k; reading across prong #1 and #3 is 0.585 @ 2k.
Thermostat - This has 4 prongs. Two are close to each other and are arranged vertically. The resistance across them is 2.96 @ 20k. The other two are probably 3-4 times farther apart than the first two and are arranged horizontally. The resistance across them is 0.100 @ 2k.
Igniter - 0.056 @ 2k.
Flame sensor - I can't get a constant reading. The values range from 0.002 to 0.210 @ 2k.
Solenoids -
2-pronged one: 1.347 @ 2k.
3-pronged one: Reading across prong #1 and #2 is 1.450 @ 2k; reading across prong #1 and #3 is 0.585 @ 2k.