I am getting 0 3 Fail on diagnostics. Brief history, I picked up a GE Profile Arctica SS that wasn't cooling. I found that the mainboard had a burnt solder connection for the comp relay. I re-soldered it and everything appeared to be working normally. I ran the self diagnostics and everything passed but when I ran 0 3 by itself it failed. Everything on the dispenser panel works and all functions of the fridge seem to be operating correctly. I then noticed the ice maker light was blinking. After a length of time trouble shooting I replaced it with a used one and it is making ice. Checked for the 0 3 Fail again and it is still there. I thought it still might be the main control board so I called GE and was able to get one for free from them. After replacing it, I still get the 0 3 Fail. I checked continuity between the temp control panel and the dispenser board and back to the mainboard, all ok. Anyone have any suggestions or should I even worry about it since everything appears to be working correctly? However, I would like to find out what the issues is for my own curiousity.
Thanks
Thanks