Once "Normal Wash" enters wash cycle, it runs indefinitely. Water temperature gets very hot. "1-Hour Wash" cycles through and completes wash properly. I turned the circuit breaker off for 30 minutes and turned back on, no improvement noted. Removed OWI and cleaned and replaced it (although it was not soiled) and that did not solve the problem.
Where is the high temperature thermostat located? From reading other threads, seems like I need to bypass the thermostat to determine if it is the source of the problem. I do not own an ohm meter.
Will I be able to determine if the problem lies in the OWI, the high temp thermostat or the control panel?
I've look at the diagnostic diagram that came with the dishwasher and I have to admit, it totally intimidates me. . .
Thanks in advance for your advice and support.
Where is the high temperature thermostat located? From reading other threads, seems like I need to bypass the thermostat to determine if it is the source of the problem. I do not own an ohm meter.
Will I be able to determine if the problem lies in the OWI, the high temp thermostat or the control panel?
I've look at the diagnostic diagram that came with the dishwasher and I have to admit, it totally intimidates me. . .
Thanks in advance for your advice and support.