My KitchenAid model KUDS01IJWH0 will only run cycle number 2 and 1. I can select a normal wash cycle but when I press the start button all lights go out. If I press the start button again it will come on and indicate cycle 2. It sounds like a drain cycle and it will run for a minute or so and then indicate cycle 1 and continue to run for another minute or so and then shut off. If I press the cancel button it will stop and all lights go out, but if I press the cancel button a second time it will again start with cycle 2 on the display and repeat the above mentioned sequence. I have tried the reset option multiple times and it will cycle thru the reset from 10 to 1 and then it still repeats the above sequence each time. I have removed and cleaned the chopper and it appears to be working fine. I do see that I need the check valve rubber replaced, but I'm not sure that is my only issue with the sequence described where it wants to drain all the time. I have removed the drain line and I see no blockage or water standing in the drain line and if I manually add water to the tube and remove the drain line under the sink I get water pumping to the drain. If someone could help I would be very appreciative as I really hate to buy a new washer at this time?
Thanks
Thanks