I have an LG washer that is making my head explode. I just replaced the bearing and put it back together. I ran a test run and the tub run running clunky and it was making a wired tinny noise. I open the back up and found what I thought was the running clunky, the tub would turn in jerky motion. I took the back cover off. The rotor bolt was loose and the rotor would turn across the splines. So I order a new rotor and install it today. I put a load of towels in and watch. Along with the tinny sound the unit would would try to turn the load of wet towels and look like the little train that couldn't it would try to initiate a turn but could not. I removed some towels and it could turn with less weight. The noise seems to be coming from the rotor stator area. Thoughts? Went to chck on the load and getting LE code.
↧