We had a power outage 2 nights ago, and once power came back, this wall oven/microwave no longer works. The only thing that works is the light in the upper microwave. The control panel is completely dead, as is the light in the lower oven.
I have checked the breaker in the service panel is it is fine, and I get 120V on each leg, and 240v across both legs.
We do have a whole house backup generator, which kicked in after 10 seconds of the outage and powered everything back up for the 3 hours the outage lasted, including sensitive electronics like a plasma tv and a computer with no issues.
Any idea where to start looking? I remove the control panel at the top of the unit and gained access to the cavity behind it. There is a large fuse there, and I got 120V from both ends of it to ground, so that's not it. Also saw a small fuse on the control board, that was ok as well.
Thanks!
I have checked the breaker in the service panel is it is fine, and I get 120V on each leg, and 240v across both legs.
We do have a whole house backup generator, which kicked in after 10 seconds of the outage and powered everything back up for the 3 hours the outage lasted, including sensitive electronics like a plasma tv and a computer with no issues.
Any idea where to start looking? I remove the control panel at the top of the unit and gained access to the cavity behind it. There is a large fuse there, and I got 120V from both ends of it to ground, so that's not it. Also saw a small fuse on the control board, that was ok as well.
Thanks!