Washer won't fill with hot water (does with cold) and won't spin.
Checked the diagnostics, error code was E59 - did test procedure 12 - resistances were all normal and everything spun freely. Tried a new speed control board - no dice. Cleared the error and tried running it, went back into diagnostic to check for new error. Got E54 - which isn't even listed in the service manual. Cleared that and tried running again. Still doesn't work, but no new errors when I check the self-diagnostic.
I'm thinking control board must be fritzy, but wondering if there is anything else I can try to better diagnose the problem.
Manual : http://www.applianceblog.com/manuals/5995413084_Washer_2004.pdf
Checked the diagnostics, error code was E59 - did test procedure 12 - resistances were all normal and everything spun freely. Tried a new speed control board - no dice. Cleared the error and tried running it, went back into diagnostic to check for new error. Got E54 - which isn't even listed in the service manual. Cleared that and tried running again. Still doesn't work, but no new errors when I check the self-diagnostic.
I'm thinking control board must be fritzy, but wondering if there is anything else I can try to better diagnose the problem.
Manual : http://www.applianceblog.com/manuals/5995413084_Washer_2004.pdf