Here is my problem....Wife goes to use dryer and it won't start. I go into the diagonistic mode and there is no error code. everything checks ok except the motor does not start. I go to troubleshooting test #3. Find the thermal fuse is blown. Got new thermal fuse installed checked through the diagnostics again and everything checks fine. Wife puts load in and starts dryer and it stops with 20 min left on the cycle, the heating element is still glowing and timer is counting down. I hit cancel and turn off dryer. Go into diagnostics again and find the thermal fuse is blown again. Luckly I bought two when the first one blew as I live out in the boonies and it is a weekend. Replaced the thermal fuse again and the dryer is working fine except the heating seems to be in high mode regardless what is selected on the control panel. When in manual controls and Air Only is selected on the Temp. the heater comes on. Still no error codes......HELP
↧