Okay, I have tried to review prior posts and do my homework so I'm not wasting anyone's time here, but I'm stumped. This model oven has a gas range on top of the oven (works fine), and electric element inside the oven on the top (works fine), and both a top and bottom gas element within the oven (neither operates). When the oven is turned on to a mode where either or both of the gas elements should light up, I hear two distinct clicks, then nothing. Often the electric element will heat up and glow, but no gas support so the oven won't reach proper temperature.
I do not believe this is anything to do with the door (I have read about failed door sensors causing the gas to not ignite). When I put into self-clean mode, the oven does lock the door and start the cleaning. When canceled, the door is unlocked and everything seems to behave.
When the oven is started in a mode that should be firing up both gas elements, I do not observe either ignitor getting hot at all. I do not believe both of the ignitors would fail simultaneously, but I did purchase a replacement ignitor just in case. I removed the old ones, and they both look fine to me. I am not sure how to check these, as they do not have two elements to measure resistance across.
What else could have failed on me to cause this issue?
Thanks in advance.
I do not believe this is anything to do with the door (I have read about failed door sensors causing the gas to not ignite). When I put into self-clean mode, the oven does lock the door and start the cleaning. When canceled, the door is unlocked and everything seems to behave.
When the oven is started in a mode that should be firing up both gas elements, I do not observe either ignitor getting hot at all. I do not believe both of the ignitors would fail simultaneously, but I did purchase a replacement ignitor just in case. I removed the old ones, and they both look fine to me. I am not sure how to check these, as they do not have two elements to measure resistance across.
What else could have failed on me to cause this issue?
Thanks in advance.