I have a Kitchenaid KSCS25INSS02 side by side refrigerator. The frige lights were not working, and I found the contacts at the bottom of the bulb sockets were bent. I thought I could be careful enough to just unplug the leads to the sockets and not do any damage. I was wrong.:o As I was bending the contacts back, I bumped the wire leads, they made contact and shorted out something. I heard a pop sound that seemed to come from the bottom of the frige. Now, my LED display does not work, nor does the ice and water dispenser. The frige and freezer are still working, but I have no control over them. Voltage to the LED board is 12.16V, so I know it's getting power. I assume this is right, but can't find any schematics. There is no voltage across the rocker switch either. I imagine the LED board or the main control board near the compressor is blown. I inspected both, but saw nothing obvious. Where should I start my trouble shooting? Should I just replace the main board and then the LED board if the main board doesn't fix it? They are close to $300 a piece. V/r
↧