Alright I have a frigidare model LGUB2642LF and what's happening is the freezer draw will not seal and is taking in air making everything ice up ,now before you say it's the gasket stop there already replaced that and didnt solve the problem now on the bottom and sides the gasket seals but on top its like a 1/4 in away from sealing if I push on the door it will seal then bounce right back out I have tried adjusting everything but still no luck I did notice that the top where it seals looked warped , does anyone know or heard of a problem like this maybe a service flash or something cause I don't know what else the change but the draw rails ....any help would be great
↧