I have a Kitchenaid 3956120 washing machine (2005). Last week it filled with water, but would not agitate or spin. I checked the motor coupler and it was broken. I replaced it and it worked great for two loads. Now it fills with water, but does not advance to anything else. The motor makes no sound. I took it apart again and the coupler is perfect (not broken). I also checked the pressure switch and that also seems to work fine. For some odd reason, when I switched the temperature switch from WARM/COLD to COLD/COLD it worked again, for one complete cycle and then did not work again. It fills correctly with water and then nothing happens---no agitation, no spin. The machine also does not drain. Last week when the coupler broke, I could hear the motor working. Now there is no noise once the washer has filled with water. I had to manually drain it to get the water out. Any ideas?
↧