We are having issues with the control portion of our ice/water dispenser. Several years ago the water stopped flowing from the dispenser. I figured it was the solenoid and we choose to not pull the unit out from the cabinet to work on it and just use the tap water. Because we have an ice machine we use the ice from the fridge/freezer unit very seldom. I had the unit out of the cabinet for another issue in the kitchen and decided to look at repairing the water issue. As it turned out the ice dispenser was not functioning either. This unit does make ice but it will not dispense either cubed or crushed ice. I have checked the continuity on the 4 micro switches and they all appear to be working properly. The dispensing paddles to make proper contact with the micro switches. I also noticed that the "night light" was out so I replaced the lamp but it did not work. I checked the voltage for the lamp socket and it appears that it is getting no voltage (I did activate the lamp switch to on). I tried to determine which if the panel was getting any voltage flow but I have not been able to determine that it is. I'm not sure if this is a board issue, wiring issue or something else. Any suggestions?
↧