Does anyone have a special trick to remove a stubborn agitator? I have removed the stud that secures it to the top of the tranny shaft but it will not budge. I have also put a ratchet strap under the agitator and tried to ratchet it up with a long 2x4 accross the top of the washer, but all it did was bend the agitator bottom piece. I even tried banging on the side of the agitator with a hammer when it was under pressure and it still won't break free. I would try just a smidgeon of C4 but am afraid I would end up using too much and blowing the whole house up.;)
↧