center was arm won't spin, top rack is not getting clean, soap still in...
For the last week or so my wife has said the top rack is not getting clean. Glasses have debris inside and out. We tried running it through empty on the sanni rinse setting to flush anything out of the...
View ArticleMaytag Neptune TL stays in wash mode stops countdown at 31
Hi, Can anyone please help me? The washer washes normally until timer reaches 31(27 on quick wash). I put it in SM to drain water out. When using spin only option it spins for 10 seconds then pauses...
View ArticleRinse Aid only last for a day in resevoir
Our dishwasher ran correctly until a couple weeks ago. When you fill the rinse aid reservoir it only last for a day or two now. The screw fill cap o-ring was a little crusty so I cleaned it up and put...
View ArticleHE2 Plus Bearings?
Ok, i bought a dryer and got the washer for free "it had a leak". Turns out the bearings are out and wore a hole in the outer tub. I plastic welded and epoxied the crack "hopefully it'll hold up" but i...
View ArticleHow to remove motor/pump assy
It quit draining, I hear a brief buzzing noise but nothing happens. Motor is hard to turn feels like pump is obstructed.
View ArticleClik here to view.
Washer won't turn on
A few days ago my Kenmore front load washer would no longer turn on. At first, I was able to unplug and re-plug it back in to the outlet and it would turn back on. The sears tech came by and said the...
View ArticleNew Kenmore Elite fromt loader
Recently purchased a Kenmore Elite front loader. While a load of was is first started, the water pulses in and abrubtly stops and does this several times. The noise of the pipes shaking in unbearable....
View ArticleKenmore Elite 665.13963K012 leaking from bottom left door
Hello, I have a Kenmore Elite Dishwasher model 665.13963K012 that is leaking from the bottom left door and I'm not sure why or how to fix it. It comes in spurts of water and then stops leaking and then...
View ArticleGap when door is closed
Slack has developed in the latch of this dishwasher, so that steam escapes along the top, when in operation. After the door is latched, one can push the door in as much as 3/8", before it feels firmly...
View ArticleMy dryer won't start
Hi, The dryer won't start up. I tested the power & I am getting 240v. The dryer has light in the drum, and thighs goes out when I close the door. The control panel has dim lights on the following...
View ArticleKENMORE FRIDGE: Not cold enough to freeze / fridge is warm.
Hope someone can direct me here as I never repaired a fridge before: SEAR KENMORE french door style fridge. With ice and water dispenser. Six years old. The symptom - The freezer is cool but not cold...
View ArticleJenn-air Model SVD48600W Oven will not heat
I have model SVD48600w JenAire (JA) range. All of the burners work fine. The oven will not heat. When I go to the oven settings, whether on conventional or on convection bake the elements do not come...
View ArticleTrying to Repair Kenmore HE2 Front Loader
A month after I moved into a new apartment complex my dryer stopped heating up. Initially I replaced the heating element because I assumed that was the problem. Then I dug out the tech sheet and have...
View ArticleDryer wont start Maytag MDE3600AYQ
Hi, My maytag wont start. The light comes on. What should I check for and where can I find a service manual to help me take it apart? Thanks
View ArticleLady Kenmore--another leak!
I replaced the leaking pump on this machine, only to see a new leak. Appears to be coming from the lint filter (368772) on the side of the tub. I say 'appears' because a few drips come down what I...
View ArticleNeed Help Accessing Stovetop Electrodes
My left front burner ignites sometimes (all other burners work fine). My plan is to switch the electrode with one of the other burners (probably the back right burner since I rarely use that one) to...
View ArticleKenmore dryer fluff cycle
My Kenmore dryer's heating element shuts off well before the end of the drying cycle. The heat setting is on normal permanent press medium high. I believe this may be a result of what is called a fluff...
View ArticleOven keeps over heating Oven Temp Sensor problem
Hello, My oven gets too hot, with the top element staying on, even after the pre heat should be over. It did this about 4-5 Months ago. Throws up Error code F3 E2. I replaced the Temp Sensor, and...
View ArticleWhirlpool Gold (gs6nvexsl00) - Need new Start Relay
Hi all. I read a lot of the thread regarding replacing the start relay on Whirlpools. I just pulled mine and it has the rattle of death! :) Anyway, was wondering if someone can point me to the correct...
View ArticleReplaced Ice Maker - Still No Ice
I have a Kenmore refrigerator (106.78902891) that stopped making ice. It would cycle but would not fill the tray with water. I learned that I could force it to fill the tray by jumping V & L. Based...
View Article