Fresh Side Fan
Newbie Everyone, My frigidaire started getting warm on the Fresh side. The freezer side was fine and evap fan was running fine. I took the Damper panel off and the Damper plastic drive is gone so I...
View Articlekenmore coldspot top freezer refrigerator not staying cool
My mothers refrigerator is warm. Freezer seems to be working fine. I'm not sure where to look to see if there is a blockage somewhere. Please help.......
View ArticleFront load washer not completing wash cycle, ERROR 22
I have been working on a GE front loading washer, model # WBVH5100HWW. When I start a load of wash set to the speed wash cycle, it starts with a 38 in the display and counts down to 24 or 22 and stops...
View ArticleKenmore he3t won't turn on and door is locked
Last night i put a load if was in the washing machine. This morning I went to put them in the dryer and the door was locked and I couldn't turn the machine on at all. Please help! I really need those...
View Articlemaytag thrust bearing repair completed... new noise
I had/ have a problem with my washer not spinning outenough; clothes are soaking wet. I looked through the forums and it looked likemy machine was in need of a thrust bearing kit. I picked one up (p/n:...
View ArticlePlease help with MAYTAG NEPTUNE TL washer problem
I recently got his washer and dryer set from my mom , she only used it for about 6 months and it has been is storage, the problem i am having is the "od" on the display , i have taken the lid latch...
View ArticleKenmore Gas Dryer 90 series - only have high heat
My gas dryer only has high heat. A month ago it had no heat and I had it repaired, replaced the coils. It worked for about 4 weeks, now low/medium won't work. Any suggestions on what could be wrong?...
View ArticleWhirlpool Duet Dryer will turn on but will not start
Duet WED9450WR1 model. I have been drying clothes today then just went to start a new load and the dryer turns on and lights up but when I push the start button it dings once and it lights up on the...
View ArticleKenmore leaked some water and oil.. Now what, can't get transmission out.
Hello, My old washing mashine leaked some water today. Took it out and when I did I found a bunch of grease under the unit. Tried to run it outside and it looked like the agitator was not moving?...
View ArticleKenmore Washer - Disabling buzzer kills final spin cycle???
Hi everyone, I posted a couple of years ago in this forum regarding disabling the buzzer on my Kenmore washer because it was so very loud! For reference, the original posting is here:...
View ArticleDishwasher Start/Resume Light Blinks Continuously
Hello, my Quiet Partner I dishwasher's Start/Resume light blinks at a continuous pace when I try to run it. It happened all of the sudden. I have tried pressing normal wash/heated dry until all the...
View ArticleKitchenaid Dishwasher KUDP01ILBS6 blowing thermal fuse
The dishwasher is about 7 years old. I originally changed the thermal fuse with fuse kit about 4 years ago. Recently, the dishwasher blew a thermal fuse about midway in cleaning cycle(waster left in...
View ArticleKenmore Gas Dryer Model 110.72832100 does not advance in Auto mode
Hello, Here's the scenario I'm dealing with today. Last night I found that a hose from the washer had leaked water onto my gas dryer. There was quite a bit of water on the top, including under the...
View ArticleAgitator won't work, will spin and pump water out
My Maytag washer agitator has stopped working. When it is supposed to turn back and forth, it just spins continously. I removed the complete agitator assembly, pumped water in the tub, and watched the...
View ArticleGE made by Samsung Refrigerator
I was looking to buy a refrigerator and went to lows today the sales guy told me that GE was made by Samsung? Is he right or just talking about parts made by Samsung?
View ArticleGFI trips with the defrost coil plugged in. The coil is new and is'nt shorted...
For a year now I've had my defrost coil unplugged(inside back) and defrosting manually. The coil is new and tested no short. But if I plug it back in, in an hour or several days later it will trip the...
View ArticleSamsung washer Looking for advice - Service Manual
The drum has dropped and seems loose. After doing some research it seems to be a bearing issue. The drum can be rotated by hand but it seems to scrape on the outer casing. The spin cycle is extremely...
View ArticleDryer thunking, scraping and overheating
I have an older GE DBB3300EA0WW dryer that has been in storage for a while and I'm trying to get usable again. When I fired it up, it was making a terrible chirping sound and seemed to be taking a long...
View ArticleF10 Error
I own a Kenmore elite model 790.4671. We decided to clean the oven for probably the second or third time and the F10 error code appeared on the display after about 2 hours of cleaning. I shut the...
View ArticleFrigidAire Upright Freezer Ice on Bottom
Hello, I have an issue with our upright freezer I haven't been able to solve: Ice forms inside on the bottom, covering the vent hole in the evaporator cover. This prevents circulation and everything...
View Article