Dishes on top rack coming out dirty- food particles all over
Dishes on the top rack are coming out dirty, food particles all over. We've cleaned the arm and replacked the water tube but still not helping. There's food particles on the stainless steel door as...
View ArticleKenmore washer will not rinse
Please help! My Kenmore washer will not rinse or spin but will wash. What seems to be the problem? Any help would be greatly appreciated. Thanks in advance.
View ArticleHelp Needed - Maytag french door refrigerator: ice forms on freezer bottom
In July of 2010 we purchased a Maytag french-door refrigerator (model #MFI2269VEM). After 11 months, sheets of ice began forming on the bottom of the freezer. Since this obviously shouldn't happen to a...
View ArticleSeeking help with Antique Norge Gas Range
Inherited an old Norge gas range (probably 1950s or 1940s?), and I"m trying to fix it up so I can use it. THe model number is: N-12TL I'm trying to find: 1) a manual that will help me repair or service...
View ArticleSuper Capacity 465 bake works, then just clicks
There's an issue when I try to Bake. First, things will be fine, and the flame will heat the oven to the desired temperature. Then, something goes wrong, and the oven continues to spark around 5 times,...
View ArticleLA9580XWN0 Whirlpool washer keeps pouring out cold water even if its turn off...
hello I have a LA9580XWN0 whirlpool imperial series HD washer, that keeps pouring COLD water, no mater what cycle its in. even if the machine is unplugged. hot water works fine but not the COLD.
View ArticleKenmore Coldspot ice tray not filling up
After some brief research, I've done the wire trick: inserting a bent paper clip into "V" and "L". Water filled the ice trays and dispensed, but the ice tray did not fill back up on its own. What's next?
View Articlefoil stuck on bottom in oven
Hi. I need your help. I had a spill, cleaned it up with non-abrasive item, then the next time I used the oven, I put some foil down on the bottom of the oven. Had another spill (ugh). The foil has...
View Articlefridge warm,freezer frosty,runs al the time
cleaned condenser got cold for a day now warm again
View Articleburner/flame spreader question
I have a Kenmore Gas Range. IT was starting to take up to an hour to heat to 350 degrees. It take nearly 2 minutes for it to light. So I thought I had an ignitor problem. When I removed the bottom of...
View ArticleMAH7500AWW Door latch - sticking when attempting to shut
Hi - I have a MAH7500AWW washer - the door latch is 'sticking' when we go to shut it. I don't want to break the damn thing, but I'm thinking that the best course of action is to replace the latch. I...
View ArticleWhat is the highest temp freezer should reach during defrost cycle
I am seeing temps at 25 degrees and also noting that ice cream is going soft during this time. Not to the point of melting but when freezer is at normal cooling temps below zero ice cream is firm.
View ArticleGE Profile fridge giving me fits!
Hello. I really need some advice on this. I will give all of the details, as this one has me and a repairman stumped. I am actually working on this fridge for a friend who is financially strapped. It...
View ArticleRefrigerator not Cooling
My refrigerator doesn't seem to be cooling although my freezer is working finer. I have turn it to the highest setting. Any suggestions would be helpful. Thanks I have a Hotpoint Model # HSS25GFPAWW
View ArticleIce maker problem
I own a Frigidaire Side-by-Side Refrigerator model# FRS26KR4DQ2. We have had this fridge for about 7 years. We have lived in our house now for 5 years and for the entire time we have lived here it has...
View ArticleOven seems to work ok, but heats up way too hot
This is a natural gas Kenmore digital gas range. It's about 10 years old. The clock / controller board was replaced about 4 years ago, for a different problem. Everything seems to work ok, no error...
View ArticleWhirlpool GD5SHAXNQ01 water inlet to ice maker dripping!!! Help!!!
Hello, I replaced my ice maker almost a year ago. Now the water inlet tube is dripping non stop. Is this possibly a problem with the inlet valve? Also, I removed the ice maker and turned the water back...
View ArticleMatag Performa- Started then died
Hi, My dryer has decided to stop working today. I started it, and 30 seconds later it turned off and won't start up again. I suspect a fuse, but I can't find anything without the manual. Any way I can...
View Article2007 GE Profile Counter Depth Issue (surprised? lol)
New to this forum lets see how this goes. Hello everyone, I have a 2007 GE profile counter depth refrigerator I bought used in the ghetto last year. didnt know what I was looking for when I picked it...
View ArticleFrigidaire Affinity 3.26 front loader cycle times changed
I have the Frigidaire Affinity fafw3801 front loader and it's 1.5 years old. I loved the machine until a month ago. The times for washing cycles keep changing. My normal cycle is now set at 1 hour 20...
View Article